Skip to content
📍 North West Resin Flooring Specialists Get your quote →
Resin Flooring Specialists North West | Commercial & Residential Epoxy

12/11/2026

Can You Put Microcement Over Tiles? Yes — Here's How It Works (UK Guide)

Tradesperson mechanically keying bathroom tiles before applying a microcement overlay

Yes, microcement can be applied over existing tiles if they are sound, well-bonded and properly prepared. It is one of the most popular reasons people choose microcement: keeping suitable tiles in place can avoid the mess, labour and disposal costs of stripping them out.

The important word is suitable. Microcement is only 2–3mm thick, so it follows the surface beneath it. It cannot stabilise loose tiles or hide movement in the floor. A proper inspection and preparation plan make the difference between a lasting finish and one that cracks or shows the old grout pattern.

Seamless microcement across the floor and walls of a contemporary bathroom

When can microcement go over tiles?

It can work well over ceramic or porcelain tiles that are firm, clean and stable. We check the whole surface, not just the obvious cracks.

A suitable tiled surface should have:

  • No loose or hollow-sounding tiles.
  • No cracks caused by ongoing movement.
  • Grout lines that can be filled and bridged as part of the system.
  • No grease, soap film, wax or polish left on the surface.
  • No signs of moisture problems that could affect the substrate or waterproofing.

It may not be suitable over badly failing tiles, a moving shower tray or a floor that flexes. Timber floors need extra assessment and preparation because movement can transfer through the finish. If the tile installation is extensively loose or uneven, removing it and repairing the substrate may be the more reliable option.

How we prepare tiles for a microcement finish

Microcement should not simply be painted over tiles. The surface needs to be stable and prepared to give the system a sound mechanical grip.

  1. Inspect and tap-test the tiles. We check for hollow sounds, loose areas, cracks and unevenness. Failed tiles need to be removed or repaired before work continues.
  2. Clean and degrease. Soap, grease, limescale, polish and silicone residue can interfere with adhesion. The surface must be clean and dry.
  3. Mechanically key the surface. Diamond grinding or other suitable abrasion roughens the tile glaze so the primer can grip. Glazed tiles need particular care because they are non-absorbent.
  4. Apply a compatible bonding primer. The primer needs to be suitable for the tile surface and the microcement system being installed.
  5. Bridge and level the grout lines. Joints are filled with compatible base material. Mesh may be needed, especially over wider joints or areas with more risk of movement.
  6. Trowel on the microcement coats. The base and finish coats build a continuous surface, usually around 2–3mm thick overall.
  7. Seal and allow it to cure. A compatible aliphatic polyurethane sealer protects the finish. The room must stay out of use for the recommended curing period before it gets wet.

Skipping the mechanical keying or using the wrong primer can lead to poor adhesion and failure. The grout lines also need proper treatment: if they are not filled and bridged correctly, their pattern can show through the finished surface.

Installer hand-trowelling microcement as part of a professional surface installation

Why keep the tiles instead of removing them?

The main advantages are less demolition and a thinner new finish. At 2–3mm, microcement adds much less height than a new screed or another layer of tiles. Door clearances, thresholds, shower drains and adjoining floors still need checking, but there may be less adjustment required.

Keeping suitable tiles can also mean:

  • Less noise, dust and disruption from tile removal.
  • Less labour and waste to dispose of.
  • A continuous, grout-free look across floors and walls.
  • The option to finish shower walls as well as the bathroom floor.

Microcement can be used on shower walls, but it must be installed as part of an appropriate wet-area system. The existing waterproofing and the details at corners, drains, pipes, trays and screens all matter. Microcement is a decorative finish, not a fix for failed tanking or a moving substrate.

What does microcement over tiles cost?

As a guide, bathroom microcement typically costs around £90–£140 per m² for floors and £120–£180 per m² for floors and walls, plus VAT. The price for an overlay depends on the condition of the tiles, how much grout filling is required, access and the wet-area detailing.

Keeping sound tiles can cost less than stripping them out and retiling because it avoids some demolition labour and disposal. However, if the tiles are failing or need extensive repairs, those savings can disappear. Ask for the preparation, sealing and any repairs to be set out clearly in the quote.

We provide a free site survey and a fixed, itemised quote that is valid for 30 days, with no hidden fees. You can also see physical sample boards before choosing a colour or finish.

How long does installation take?

A typical bathroom resurfacing over tiles takes 3–5 days, including preparation, application and sealing. The room then needs to cure before it can get wet. Exact times depend on the system, room conditions and the manufacturer’s instructions, so we confirm the expected return-to-use date for your project.

The finish can be specified in matte or satin, with other sheens available depending on the system. Microcement is also compatible with underfloor heating when installed correctly. Heating should be switched off and restarted gradually in line with the installer’s guidance.

If any work exposes a concrete or screed substrate, we may need to check its moisture level using RH testing. Where required, a suitable DPM and preparation system can be specified. On concrete repairs, the substrate may also need mechanical preparation to a suitable profile, often CSP 2–3. For wet floors, ask about a suitable slip-resistant finish, including whether an R11 option is appropriate for the space.

Bright contemporary bathroom with seamless microcement on the walls and floor

Is microcement over tiles a DIY job?

We do not recommend it as a DIY project. The finish is applied in thin hand-trowelled coats, and poor preparation, incorrect priming or rushed sealing can cause visible joints, cracking or adhesion problems. Wet areas also need careful waterproofing and detailing.

Our team is Trust A Trader vetted and covered by £5 million Public Liability and £10 million Employers’ Liability insurance. We install across Greater Manchester, Cheshire, Merseyside, Lancashire and North Wales, including projects in Manchester, Altrincham, Wilmslow, Chester, Liverpool and Formby.

Explore our microcement and surface systems, read more in our FAQs, or see our coverage for Cheshire and Liverpool.

FAQs: microcement over tiles

Can microcement go over tiles?

Yes, microcement can go over tiles if they are firmly bonded, clean, stable and prepared with mechanical keying, a compatible primer and correctly bridged grout lines.

Do the tiles need to be removed?

No, the tiles do not always need to be removed. Sound, well-bonded tiles can often stay in place, but loose, hollow or badly cracked tiles need repair or removal.

Will grout lines show through?

Grout lines should not show through when they are properly filled and bridged. Poor preparation or movement in the substrate can cause the old pattern to become visible later.

Is microcement waterproof?

A correctly installed and sealed microcement system can be water-resistant for bathroom use. It does not replace suitable waterproofing beneath the finish, especially in showers and wet rooms.

How long does microcement last?

A properly installed microcement finish can provide many years of service. Its lifespan depends on preparation, the condition of the underlying tiles, correct sealing and suitable care.

Can microcement be applied to shower walls?

Yes, microcement can be applied to shower walls when the substrate, waterproofing, corners and pipe details are suitable and the finish is correctly sealed and cured.

Not sure whether your tiles are suitable? Request a free site survey and we’ll check their condition before recommending an overlay or removal. We’ll then provide a fixed, itemised quote. You can also send your postcode and project details on WhatsApp.