10/11/2026
Resin Flooring Cost per m² in the UK (2026 Guide): What You'll Actually Pay

Standard heavy-duty commercial epoxy and flake systems typically cost £60–£85 per m², while luxury bespoke metallic marble resin is typically £85–£120 per m² plus VAT. Those are our published guide prices for an epoxy resin floor, not a substitute for a site-specific quote. Your final resin flooring cost depends on the area, the condition of your subfloor, the system you choose and the preparation required. We provide a fixed, itemised quote held for 30 days, with no hidden fees.
Resin flooring cost per m²: typical system prices
Use this table to compare the main systems we install. Prices are indicative: the scope, finish and subfloor condition affect the final figure. Ask us to confirm VAT and exactly what preparation is included in your quote.
| Flooring system | Typical guide price per m² | Typical build thickness | Best suited to |
|---|---|---|---|
| Seamless resin flooring | £60–£85 | 2–3mm | Homes, retail and commercial floors needing a continuous, easy-clean finish |
| Architectural microcement | £80–£105 | 2–3mm | Contemporary floors, walls and wet rooms with a hand-trowelled concrete look |
| Bespoke liquid marble overlay | £85–£120 + VAT | 2–3mm | Feature floors, hallways and kitchens where custom veining is part of the design |
| Garage flake system | £60–£85 | Typically 2–3mm | Garages, workshops and other areas needing a durable, textured finish |
Microcement is a separate surface system rather than an epoxy resin floor. We have included it because it is often considered alongside seamless resin when planning a renovation. System build-up and the exact price can vary with the base and specification. For a closer look at the wet-room side, our microcement bathroom guide covers the finish in detail, and the microcement bathroom cost guide prices it room by room.
See our resin and microcement services for more detail on finishes and applications.

What affects the price of resin flooring?
Floor area
Larger floors can offer a lower price per m² because materials and installation time are spread over more area. Small rooms may cost more per m² because preparation, set-up and application still take time. Doorways, narrow corridors and multiple separate rooms can also add complexity.
Subfloor condition and preparation
A clean, sound slab is a better starting point than concrete with old coatings, cracks, dips or damp. Grinding, crack repairs, levelling and an epoxy damp-proof membrane (DPM) can add to the cost, but may be essential for a reliable bond.
Moisture testing matters too. We check the slab’s relative humidity (RH) and assess whether a DPM is needed before installation. Applying resin over a damp or poorly prepared base can contribute to blistering or peeling.
System, finish and slip resistance
The price depends on the system and the finish you choose. A straightforward solid-colour epoxy floor is different from a bespoke metallic marble design. A flake system has its own broadcast and sealing process, while polyurethane may be specified as a resin system or as a protective topcoat.
Sheen also affects the specification. Resin finishes can be matte, satin or high-gloss. Where extra grip is required, an R11 anti-slip finish can be specified, subject to the needs of the space. The more tailored the design or safety specification, the more it can affect the quote.
Access and working hours
Furniture, machinery, restricted access and the need to work around a live business can affect the schedule and price. Commercial projects carried out at night or over a weekend may cost more than work during normal hours.
What does preparation pay for?
The resin you see is only one part of the floor. A durable finish depends on the base being prepared to suit the chosen system. Our four-stage approach typically includes:
- Diamond grinding with HEPA dust extraction. We remove weak surface material and contaminants, then prepare the concrete to a suitable CSP 2–3 profile so the primer can bond properly.
- Moisture testing and epoxy DPM, if required. RH testing helps us assess moisture conditions. If the readings or slab conditions call for it, a DPM helps manage moisture before the resin is applied.
- Fibre-reinforced levelling screed, where needed. This helps create a more even surface and can be useful where there are dips or underfloor heating.
- Resin layers and a protective polyurethane topcoat. The specified topcoat helps complete the finish, with sheen and slip resistance selected for the room.

Not every floor needs every step. The free site survey helps us identify what is necessary rather than adding work without a reason. A very low quote may leave out preparation, moisture management or the final protective coat. If a coating fails because the slab was not prepared for it, repairs and re-coating can cost more than getting the specification right at the start.
Is resin flooring worth the cost over 10 years?
Resin is not always the cheapest option to install, and the right choice depends on your room and budget. Its value comes from the combination of a seamless finish, easy cleaning and a system selected for the space. There are no grout lines to scrub or renew, and a correctly specified, sealed resin floor is waterproof.
Resin can also work with wet or electric underfloor heating when the system and installation are suitable. That makes it a useful option for kitchens, living areas and other spaces where you want the finish to continue across rooms. Over ten years, compare the full cost of installation, cleaning, maintenance and repairs, not only the initial price. Tiles may suit your project, but their grout can need ongoing cleaning and maintenance; premium tile installation can also cost more than a basic resin finish.
Most standard installations take around 2–4 days, depending on preparation, system and curing requirements. We’ll explain the expected programme and when the floor can be used as part of your quote.

Commercial and residential pricing
Residential projects often focus on appearance, room layout, underfloor heating and transitions between spaces. Commercial projects may cover larger areas, but they can also require heavier-duty specifications, R11 anti-slip, defined work windows or night and weekend installation.
A large commercial floor may benefit from economies of scale, but a busy site or more demanding performance requirements can affect the final cost. The best comparison is between itemised quotes for the same system, preparation, thickness and finish.
We work across Greater Manchester, Cheshire, Merseyside, Lancashire and North Wales, including projects in Manchester, Liverpool, Altrincham, Knutsford, Chester, Wilmslow, Formby, Southport and Deeside. We are Trust A Trader vetted and carry £5M public liability and £10M employers’ liability insurance.
Resin flooring cost FAQs
How much does resin flooring cost per m² in the UK?
Standard heavy-duty commercial epoxy and flake systems typically cost £60–£85 per m², while luxury bespoke metallic marble resin typically costs £85–£120 per m² plus VAT. The final price depends on the floor area, subfloor and preparation required.
Why do resin flooring quotes vary so much?
Resin flooring quotes vary because they may cover different systems, thicknesses, finishes and preparation. Check whether grinding, moisture testing, DPM, crack repairs, levelling and the topcoat are included.
Is resin flooring worth the money?
Resin flooring can be worth the investment if you want a seamless, grout-free and easy-to-clean surface. Consider the full specification and ongoing care, not just the starting price per m².
How long does resin flooring installation take?
Most standard installations take around 2–4 days. The schedule depends on preparation, the selected system and the time needed for curing before the floor is used.
Does the price include subfloor preparation?
Our quote explains the preparation included for your project. A free site survey lets us inspect the subfloor and identify whether grinding, moisture management, repairs or levelling are needed.
Is resin flooring cheaper than tiles?
Not always: the cost depends on the resin system, tile choice, installation and subfloor work. Compare the full installed price and long-term maintenance, including the care of tile grout.
Get a fixed quote for your floor
Arrange a free site survey and we’ll inspect the subfloor, discuss finishes and provide an itemised quote held for 30 days. You can also try the instant cost estimator for a ballpark figure, then request a confirmed price for your project.
Read our frequently asked questions, or see our area pages for resin flooring in Cheshire, resin flooring in Liverpool, Greater Manchester and North Wales. Planning a wet room or bathroom? Our microcement bathroom cost guide has the numbers, and our kitchen flooring comparison covers kitchens. To book a survey or check coverage, contact our team with your postcode.