Skip to content
📍 North West Resin Flooring Specialists Get your quote →
Resin Flooring Specialists North West | Commercial & Residential Epoxy

08/11/2026

Microcement Bathrooms: Cost, Pros & Cons and How It's Installed (UK 2026 Guide)

Seamless grey microcement across the walls and floor of a contemporary bathroom

Microcement is a hand-trowelled 2–3mm micro-mortar that creates a continuous finish on bathroom floors and walls. In the UK, a typical installed microcement bathroom costs around £90–£140 per m² for floors only, or £120–£180 per m² for floors and walls, plus VAT, as a sealed system. These are guide prices, not a fixed quote: the final cost depends on the area, substrate, number of coats and waterproofing required. Our fixed, itemised quotes are held for 30 days.

What does a microcement bathroom include?

Microcement is applied in thin layers over a properly prepared surface, then sealed to create a hard-wearing finish. Because it is only around 2–3mm thick, it can usually be applied without the build-up of a thick concrete slab. The finish can run continuously across floors, walls, shower enclosures and other bathroom features.

There are no grout lines to interrupt the surface. That gives the room a clean, understated look and makes routine cleaning simpler. Choose from different colours and textures, and ask to see a physical sample: the hand-trowelled finish has natural variation, so a sample helps you judge the colour and feel in your own light.

Contemporary bathroom with seamless microcement walls and floor

Microcement bathroom: pros and cons

The advantages

  • No grout lines: fewer joints for soap residue and mould to collect in.
  • A continuous finish: floors and walls can flow together, including around shower areas.
  • Works with underfloor heating: suitable for wet and electric systems when the full build-up is specified and installed correctly.
  • Very thin: the 2–3mm finish can help avoid significant changes to floor height.
  • Flexible design: choose the colour and texture to suit a modern, minimalist bathroom.

The drawbacks

  • Preparation is critical: the substrate must be sound and stable. Movement, loose tiles or unresolved damp can cause problems.
  • It needs a skilled installer: the finish is hand-applied, and poor workmanship or preparation can lead to cracking or debonding.
  • It is not the cheapest option: specialist labour and careful preparation are part of the cost.
  • It needs looking after: use the right cleaner and plan to inspect and renew the sealer every few years, as advised for the chosen system.

Installer hand-trowelling a microcement finish

Microcement vs tiles vs resin

Prices below are indicative guides, not like-for-like quotes. The exact specification, room size and preparation can change the total.

Feature Microcement Tiles Resin
Grout lines None Usually present None
Waterproofing Requires suitable tanking in wet areas and a compatible sealer Depends on the full installation, including joints and waterproofing beneath Depends on the specific system and its wet-area specification
Over existing tiles Often possible if tiles are sound and correctly prepared New tiles can sometimes be laid over old tiles, subject to checks Sometimes possible on sound tiles with correct mechanical preparation and primer
Underfloor heating Compatible when correctly specified Compatible with suitable installation Compatible when the system is specified for it
Typical cost guide £90–£140/m² floor only; £120–£180/m² floors and walls, plus VAT Often around £60–£120/m² installed; design and preparation affect the price Varies by system; our resin flooring cost guide lists £85–£120/m² for metallic marble resin, plus VAT
Maintenance pH-neutral cleaner; inspect and renew sealer as needed Clean tiles and grout; repair grout if it deteriorates Follow the selected system’s cleaning and maintenance guidance

Can you apply microcement over existing tiles?

Yes, microcement can go over existing tiles if they are firmly bonded, stable and in good condition. First, the installer checks for loose or hollow tiles, movement, water damage and other defects. Any underlying problems need addressing before the finish is applied.

The glazed tile surface is then mechanically abraded or keyed so the new layers can grip. Grout lines and uneven areas are filled as needed, and a bonding primer is applied to help the system adhere to the prepared surface.

Skipping these steps can leave the microcement with a weak bond. Loose tiles, poor adhesion or movement beneath the finish can lead to cracking or debonding. Covering tiles does not fix a leak or an unstable substrate.

What does installation look like?

A straightforward bathroom typically takes 3–5 days on site. The installer prepares the surface, applies primer and microcement coats, then allows drying between stages before sealing. Repairs, complex details or additional waterproofing work can extend the programme. Follow the installer’s guidance on when the finished room is ready for showering and everyday use.

For a wet room or shower enclosure, the substrate needs appropriate tanking before the decorative finish is applied. Corners, floor-to-wall junctions and pipe penetrations need careful attention. The microcement is then sealed with a compatible aliphatic polyurethane system as specified for the application. The tanking beneath and sealer above each play a role; the decorative surface alone should not be treated as the waterproofing plan.

For shower floors and wet rooms, discuss slip resistance before choosing the finish. An R11-rated option may be appropriate, but ask for the rating and test information for the actual floor system, including its sealer. A smooth finish can be slippery when wet, so the floor may need a more textured or anti-slip specification than the walls.

Microcement finish carried across the floor and walls of a wet room

How do you maintain a microcement bathroom?

Clean the surface with a soft cloth or mop and a pH-neutral cleaner. Avoid abrasive pads and bleach-heavy products, which can damage the sealer. Wipe away standing water where practical, and follow the care instructions for the system used in your bathroom.

The sealer is a protective layer, not a permanent finish. Check it regularly and plan for resealing every few years, according to the product guidance and the wear it receives. Shower floors and other frequently used wet areas may need attention sooner than less exposed surfaces.

Is microcement right for your bathroom?

Microcement can suit bathrooms where you want a seamless look and fewer joints to clean. It is particularly worth considering if you want the same finish on floors and walls, or if you are exploring an overlay on existing tiles. The key is to get the substrate, tanking and sealing specified properly before choosing a colour.

North West Resin Flooring Specialists Ltd is Trust A Trader vetted, £5M Public Liability and £10M Employers’ Liability insured, City & Guilds qualified and Ox Resin approved. We offer a free site survey and physical samples across the North West, including Manchester, Altrincham, Wilmslow, Knutsford, Chester, Liverpool, Formby, Southport and Deeside.

See our surface systems and services, find answers in our FAQs, or explore our Cheshire and Liverpool coverage pages.

Microcement bathroom FAQs

Is microcement good for bathrooms?

Yes, microcement can be a good bathroom finish when the substrate, waterproofing and sealer are correctly specified. It gives you a continuous, grout-free surface for floors and walls.

Is microcement waterproof?

Microcement needs a correctly specified waterproofing system in wet areas. In a shower or wet room, that means suitable tanking beneath the finish and a compatible sealer above it.

Can microcement go over tiles?

Yes, if the tiles are sound, stable and properly prepared. The surface needs mechanical keying, appropriate filling and a bonding primer before application. We've written a full guide on putting microcement over tiles, including the checks we make first.

Does microcement crack, and how long does it last?

Microcement can crack if it is applied over an unstable or moving substrate. With suitable preparation, installation and care, it can provide a durable finish; ask your installer about the system’s maintenance guidance and warranty.

Is microcement slippery when wet?

A smooth microcement floor can be slippery when wet. Ask for an appropriate textured or anti-slip finish and test information for the complete sealed system, especially in a shower.

How much does a microcement bathroom cost?

As a UK guide, allow around £90–£140 per m² for a floor-only finish or £120–£180 per m² for floors and walls, plus VAT. The final figure depends on the area, substrate, number of coats and waterproofing. Our newer microcement bathroom cost guide breaks the price down by room size with worked examples.

If you are considering a microcement bathroom, we can arrange a free site survey, bring physical samples and provide a fixed, itemised quote held for 30 days. Contact us to discuss your project or send us your postcode to check coverage.

Wondering what a whole-floor resin finish would cost instead? Our resin flooring cost per m² guide breaks down typical prices by system.