Skip to content
📍 North West Resin Flooring Specialists Get your quote →
Resin Flooring Specialists North West | Commercial & Residential Epoxy

17/11/2026

Microcement Bathroom Cost in the UK: 2026 Price Guide per m²

Seamless grey microcement bathroom with walk-in shower and brass fittings

As a UK guide, microcement bathroom cost is around £90–£140 per m² for floors only, or £120–£180 per m² for floors and walls, plus VAT, as a sealed system. These are guide prices, not a final quote. Your cost depends on the area, the condition of the surfaces, the number of coats, any waterproofing or tanking needed, and the sealer system. We provide fixed, itemised quotes held for 30 days.

What does the price cover?

The rates above are a starting point for a professionally applied, sealed microcement finish. A typical system has a total thickness of around 2–3mm, with compatible primer, microcement coats and protective sealer. That thin build can help avoid significant changes to floor height.

The price may change if the existing surface needs repairs, levelling or extra preparation. Shower areas and wet rooms also need the correct waterproofing beneath the decorative finish. Ask your installer to list clearly what is included and what is an additional cost.

Contemporary bathroom with continuous microcement floor and walls

Worked examples: what might a bathroom cost?

These examples use the guide rates above and are illustrative estimates, before VAT. They assume a sealed finish. The additional preparation allowance is an example only; your survey will show whether repairs or extra tanking are needed. Check that tanking is not counted twice if it is already included in the quoted rate.

Bathroom size Approximate treated area Guide finish cost Example extra preparation allowance Illustrative total before VAT
Small bathroom: 5m² floor and 20m² walls 25m² £3,000–£4,500 £500–£1,500 £3,500–£6,000
Mid-size family bathroom: 6m² floor and 24m² walls 30m² £3,600–£5,400 £700–£1,800 £4,300–£7,200
Large bathroom or wet room: 8m² floor and 35m² walls 43m² £5,160–£7,740 £1,000–£3,000 £6,160–£10,740

The finish cost is calculated using the floors-and-walls guide rate across the treated area. The extra allowance illustrates how repair work, levelling or additional waterproofing can affect a project total. If you are coating only the floor, use the £90–£140 per m² guide instead.

Small rooms can have a higher price per m² than larger, simple spaces. There is still set-up and skilled hand application to allow for, even when the bathroom is compact.

What changes the price?

  • Total area: More floor or wall surface means more material and labour. Awkward corners and multiple small surfaces can also take longer.
  • Walls as well as floors: A continuous finish across walls and floor uses more material and requires careful detailing around fittings, corners and edges.
  • The existing surface: Sound tiles may be suitable for an overlay after checks and preparation. Loose tiles, damaged plaster, uneven screed or movement may need repair or removal first.
  • Waterproofing and tanking: Shower zones, wet rooms and floor-to-wall junctions need a suitable waterproofing build-up. Confirm whether tanking is included in the quote.
  • Coats, colour and finish: The specified number of coats, colour changes and sample approvals affect labour and material use. Ask whether the price includes a physical sample board.
  • Sealer and sheen: Microcement can be finished in matte, satin or gloss, depending on the system. The sealer needs to suit the bathroom and the level of use.
  • Access and timing: Difficult access, restricted working hours or fitting around other trades can affect the programme and cost.

For concrete floors, ask how the installer will check moisture and prepare the surface. Depending on the substrate, this may include relative humidity (RH) testing, mechanical diamond grinding to a CSP 2–3 profile, and a damp-proof membrane (DPM) if required. A DPM for ground moisture is not the same thing as tanking a shower area.

Installer hand-trowelling a microcement finish

Microcement cost compared with other bathroom finishes

These are broad UK guide prices, not like-for-like specifications. Removal, repairs, waterproofing and the number of surfaces included can change the final quote.

Finish Indicative installed cost Maintenance considerations
Microcement £90–£140/m² for floors; £120–£180/m² for floors and walls, plus VAT No grout lines; clean with a suitable pH-neutral cleaner and look after the sealer.
Ceramic or porcelain tiles Around £60–£120/m² Durable, but grout lines need regular cleaning and may need repair over time.
Bathroom vinyl Around £25–£60/m² Often a lower-cost floor option; check suitability for the room and installation details, especially around wet zones.
Wet-wall panels Around £50–£120/m² Fewer joints than small-format tiles, but panel joints and edge details still need correct installation and care.

Microcement is not always the cheapest choice. Its value is in the continuous finish, minimal build-up and lack of grout lines. If your priority is the lowest initial spend, vinyl or a straightforward tiled floor may be a better fit.

Watch for quotes that leave out preparation

A low quote can become expensive if it skips the work needed to make the finish last. Applying a decorative system over a poorly prepared surface can cause weak adhesion and, if the substrate moves or remains damp, cracking or debonding. Repairing and recoating later may cost more than doing the preparation properly at the outset.

A clear, itemised quote should state whether it includes:

  • Inspection and preparation of the existing substrate.
  • Mechanical diamond grinding or keying where the surface requires it.
  • Compatible primers and any necessary repairs or levelling.
  • Tanking and reinforcement at wet-zone junctions, where needed.
  • The specified number of microcement coats and chosen colour.
  • Sealer, sheen and any specified anti-slip finish.
  • A physical sample board and clear aftercare guidance.

For shower floors, ask whether an R11 anti-slip finish is available and suitable. Check that the rating applies to the complete specified floor system, including its sealer, not just to a sample or an individual product.

How long does installation take, and is it suitable for underfloor heating?

A typical microcement bathroom installation takes around 3–5 days on site, depending on preparation, drying times and the number of surfaces. Repairs or additional waterproofing can extend the work. Ask your installer when the bathroom can be used and when the shower can be put back into service.

Microcement can work with wet or electric underfloor heating when the full system and substrate are specified and installed correctly. Follow the installer’s advice on heating during installation and after the finish has cured.

Our team surveys the substrate before quoting, brings physical samples and explains the work in plain terms. We are Trust A Trader vetted and hold £5M Public Liability and £10M Employers’ Liability insurance. We work across Greater Manchester, Cheshire, Merseyside, Lancashire and North Wales, including Manchester, Liverpool, Altrincham, Knutsford, Chester, Wilmslow, Formby, Southport and Deeside.

Microcement bathroom cost FAQs

How much does a microcement bathroom cost in the UK?

As a UK guide, allow £90–£140 per m² for floors only or £120–£180 per m² for floors and walls, plus VAT. The final price depends on the substrate, waterproofing, finish and amount of preparation required.

Is microcement more expensive than tiles?

Microcement can cost more than a straightforward tiled installation, depending on the tile and preparation selected. It gives you a grout-free surface, but it needs specialist application and a suitable sealed system.

What affects the price of a microcement bathroom?

The main cost factors are treated area, substrate condition, tanking, number of coats, colour and access. Your quote should explain which of these are included in the price.

Does the price include waterproofing?

Not always; ask your installer to confirm whether tanking is included. Wet zones need an appropriate waterproofing build-up, and a decorative microcement finish should not be assumed to replace it.

How long does a microcement bathroom installation take?

A typical installation takes around 3–5 days on site. Preparation, repairs and drying times can affect the programme, and the room may need additional time before it is ready for showering.

Is microcement worth the money?

It may be worth the cost if you want a thin, seamless finish with no grout lines and a continuous look across floors and walls. Compare the complete system and preparation, not just the per-m² price, with other bathroom options.

For more on the finish and installation, read our microcement bathroom guide. If you are weighing up finishes, our resin flooring cost per m² guide compares what an epoxy resin floor costs with microcement, and can you put microcement over tiles covers overlaying an existing tiled bathroom. You can also explore our services, FAQs, and coverage in Cheshire, Liverpool, Greater Manchester and North Wales.

If you are planning a bathroom renovation, request a free site survey and fixed, itemised quote. Or send us your postcode on WhatsApp and we’ll check coverage. Quotes are held for 30 days, with no hidden fees.